Michigan Technical University in the United States for titanium standard parts cutting issues relating to the appropriate amount of cutting fluids have been studied in an attempt to meet the processing requirements of the situation, so that the least amount of cutting fluid, cutting fluid related costs are also kept to a minimum.
They test the Ford Motor Company made the concentration of cutting fluid, workpiece material, tool type and geometry are all tested and studied and analyzed the surface roughness, BUE and cutting forces , obtained by testing the most appropriate cutting fluid consumption. US manufacturing companies Thyssen "minimal lubrication" processing technology has been studied by the cutting tool flow or aerosol effect in the processing area, cutting fluid flow by the CNC program control, and achieved good results. Chengyong, who used a variety titanium standards of complex drilling minimal lubrication technology board. When drilling a titanium aluminum multilayer composite plate, friction and wear effect drilling titanium chips will lead to flared aluminum holes, the volatility and average pore diameter aperture value increases and possible tolerance. Test uses a minimal amount of lubrication technology, use coated tools and the use of swarf removal and reaming way process, reducing the width of the blade, increasing the feed horn and a stepped shaft hole machining to ensure the quality.

Titanium screws, and general stainless steel, iron, titanium standard parts copper screws are the same, but the material is titanium material, usually titanium material is titanium TA2 and TC4 titanium alloy materials. Titanium screws raw materials are more expensive, titanium standards but also very beautiful to make more, it seems crafts, titanium acid corrosion, so titanium screws are generally quite high prices.

If the description is made of titanium titanium titanium standard parts plate and a chemical composition of the original elements. Titanium is very light. Commonly used in aviation. Medicine. And corrosion-resistant. So the value is more expensive.
Stainless steel much cheaper. Use more widely. Why not rust stainless steel, adding more than 12.5% of chromium in the steel-related. Corruption and incompetence of corrosion in an oxidizing medium, chrome steel surface to make quickly generate a dense passive film to prevent metal matrix is destroyed. When the chromium content at more than 12.5%, form a dense stable film, rust resistance occurs leap forward consolidation, greatly enhanced corrosion resistance, which is why the amount of chromium-containing stainless steels have a 12% the above reasons. titanium standards Commonly used stainless steel 304 chemical elements like content is 1Cr18Ni9Ti where 1 means carbon. Cr18 means that the content of chromium. Ni9 Ti nickel content means that is you said above the titanium titanium plate. Rarely content in stainless steel.