titanium bars filters Cautions

1 collision to avoid scratches, dust and oil.
2 in use,titanium wire  its working pressure should not exceed the rated working pressure.
3 When three normal use, at least 3-5 minutes of low-voltage start-up time, the relative pressure should be controlled below 0.5Mpa, and then gradually transferred to the normal operating pressure of work needed (not to exceed the maximum pressure 0.4Mpa).
4 titanium bars after work to run to a certain period, probably due to clogged filter elements,titanium manufacturer resulting in increased pressure to reduce the flow, you need to recoil or backwash regeneration. Depending on the regeneration cycle the rated pressure and flow rate setting.