The main manufacturing process on titanium are described as follows: Forging: metal recrystallization titanium metal temperature casting process conducted above. Hot-rolled: higher recrystallization rolling processes under temperature. Cold-rolled: plastic deformation temperature is lower than the temperature of the rolling process reply. Annealing: the metal is slowly heated to a certain temperature. Then cooled at a rate to suit a metal heat treatment process. Pickling: The article was immersed in an aqueous solution of titanium wires sulfuric acid, to remove oxides and other thin-film metal surfaces. Prior to disposal or disposal center plating, enamel, rolling and other processes.